|
We offer a complete line of Exceptional 3M Corrosion Protection formerly known as Thortex - Copon products. Whatever your needs, 3M Scotchkote provides you with the solution!
Whatever your needs, 3M Scotchkote provides you with the solution!
3M™ Scotchkote™ 323
3M™ Scotchkote 323 Liquid Epoxy Coating is a twopart
system designed to protect steel pipe and other metal
surfaces from the harsh affects of corrosion.
3M™ Scotchkote™ 352
3M™ Scotchkote 352 is a plural component coating system
designed to protect buried steel structures from the harsh
affects of corrosion. Scotchkote 352 can be used in a
wide variety of other field applications where corrosion
protection of metal is required. It can also be used as an
abrasion-resistant top coat on FBE for use in horizontal drill
applications.
3M™ Scotchkote™ 413/215
3M™ Scotchkote™ 413/215 PC and 413/215 PC Cold
Weather Grade (CWG) Patch Compounds are twopart,
ambient temperature cure, high solids content,
thermosetting, liquid epoxy coatings.
3M™ Scotchkote™ Patch Stick Compound 226P, Green
3M Scotchkote Hot Melt Patch Compound 226P is a heat bondable
polymeric coating in stick form designed for plant and field repair
of Scotchkote Fusion Bonded Epoxy Coatings. Scotchkote Hot Melt
Patch Compound 226P is ideal for repairing minor pinholes and
abrasions. Scotchkote 226P is colormatched to Scotchkote 226N
and 6233. Scotchkote 226P can be used on holidays up to 2 mm in diameter.
3M™ Scotchkote™ Spray System HSS-450
For Spray Application of 3M™ Scotchkote
Liquid Epoxy Coating 323
3M™ Scotchkote™ Liquid Epoxy Coating 306
3M Scotchkote 306 and 314 Liquid Epoxy Coatings are
ambient temperature cure, two-part thermosetting 82% solids
liquid epoxy coatings designed to protect metal, concrete and
other surfaces from corrosion and deterioration. Scotchkote
306 and 314 coatings may be applied in the field by brush,
roller and conventional or airless spray equipment.
3M™ Scotchkote™ Liquid Epoxy Coating 324
3M™ Scotchkote 324 Liquid Epoxy Coating is designed to protect
metal from corrosion and is particularly useful in coating tanks,
valves, piping and special fabrications where a wide range of
chemical resistance is required. The coating is a heat-cured, twopart,
thermosetting, 83 percent solids liquid epoxy that may be
applied using conventional air or airless spray equipment. A coating
thickness up to 10 mils/254 µm can be obtained in one application
without sag. The applied coating B-stages at ambient temperature to
a hard gel, allowing inspection and repair prior to cure.
Buried Steel Coatings 323 & 352
This specification defines the application
requirements of Scotchkote™ plural-component
coating materials applied to steel substrates for
buried service.
Poly Nox
Poly- Nox is a high performance acrylic coating designed
for use as a corrosion resistant and encapsulation system for
metallic and cementitious surfaces.
Metal Tech EG
Metal-Tech E.G. is a high performance multi purpose
synthetic metal repair compound specifically developed for metal
repairs requiring good mechanical strength combined with easy
machining properties.
Metal Tech RG
Metal-Tech R.G. is a high performance rapid curing
metal engineering grade repair compound specifically developed
for rapid turn round of metal repairs where excellent mechanical
strength and easy machining properties are required.
Metal Tech FG
Metal-Tech F.G. is a high performance synthetic metal
compound specifically developed for resurfacing and reforming
damaged metal machiney and equipment.
Metal Tech SG
Metal-Tech S.G. is a high performance, rapid curing
synthetic metal repair compound in the form of a stick which has
been specifically developed for on site repairs to metal
components such as leaking pipes, tanks, ducts, radiators etc.
Metal Tech PR
Metal-Tech P.R. is a high performance rapid curing
moisture activated repair bandage, specifically developed for the
repair of leaking pipes.
Cerami Tech EG
Cerami-Tech E.G. is a high performance multi
purpose metal repair compound specifically developed for
rebuilding metal components in a fluid flow environment
damaged by erosion and corrosion.
Cerami Tech FG
Cerami-Tech F.G. is a high performance fluid grade
engineering resurfacing compound designed for use in fluid flow
environments.
Cerami Tech HG
Cerami-Tech H.G. is a high performance abrasion
resistant metal repair compound specifically developed for use
where resistance to sliding abrasion is required.
Cerami Tech CR
Cerami-Tech C.R. is a high performance solvent free
coating designed for use as a resurfacing and lining system to
improve the efficiency in fluid flow environments.
Cerami Tech HTX
Cerami-Tech H.T.X. is a high performance fluid grade
engineering resurfacing compound specifically developed for high
temperature immersion conditions and is ideal for tanks, vessels
and equipment operating in high temperatures.
Cerami Flex EG
Cerami-Flex E.G. is a high performance solvent free
flexible poly ceramic repair compound designed for the
rebuilding and resurfacing of equipment operating in fluid flow
environments.
Cerami Flex FG
Cerami-Flex F.G. is a high performance solvent free
flexible polyceramic repair coating designed for the
resurfacing of equipment operating in fluid flow environments.
Copon Hycote 152LV (Chemi Tech 152LV)
Chemi-Tech 152 L.V. is a high performance solvent
free high build system designed for use as a corrosion resistant
coating for steel and concrete structures with a minimum of
surface preparation.
Copon Hycote 152LV AS (Chemi Tech 152LV- AS)
Chemi-Tech 152 L.V. - A.S. is a high performance
solvent free high build system designed for use as a corrosion
resistant coating for steel and concrete structures with a minimum
of surface preparation.
Chemi Tech UC
Chemi-Tech U.C. is a high performance solvent free
coating designed for use where exceptional resistance to chemical
attack is required.
Chemi Tech CR
Chemi-Tech C.R. is a high performance solvent free
coating designed for aggressive environments.
Chemi Tech EP
Chemi-Tech E.P. is a high performance solvent free
epoxy lining designed for use as a heavy duty chemical resistant
coating for concrete and metal surfaces.
Flexi Tech 60 EG
Flexi-Tech 60 E.G. is a 60 Durometer high
performance paste grade elastomer which has been specifically
developed for the repair of rubber components by trowel or putty
knife and is suitable for use on impellers, chutes, hoppers, valves,
rollers, gaskets, hoses, conveyor belts, off road tyres etc.
Flexi Tech 60RG
Flexi-Tech 60 R.G. is a 60 Durometer high
performance rapid curing paste grade elastomer which has been
specifically developed for the repair of rubber components by
trowel or putty knife and is suitable for use on impellers, chutes,
hoppers, valves, rollers, gaskets, hoses, conveyor belts, off road
tyres etc.
Flexi Tech 60 FG
Flexi-Tech 60 F.G. is a 60 Durometer high
performance fluid elastomer which has been specifically developed
for the resurfacing of rubber components and is suitable for use
on impellers, chutes, hoppers, valves, rollers, gaskets, hoses,
conveyor belts, off road tyres etc.
Flexi Tech 75 RG
Flexi-Tech 75 R.G. is a 75-80 Durometer high
performance rapid curing paste grade elastomer which has been
specifically developed for the repair of rubber components by
trowel or putty knife and is suitable for use on impellers, chutes,
hoppers, valves, rollers, gaskets, hoses, conveyor belts, off road
tyres, rubber tanks, rubber boats, ground sheets etc.
Flexi Tech 80 EG
Flexi-Tech 80 E.G. is a 80 Durometer high performance
paste grade elastomer which has been specifically developed for
the repair of rubber components by trowel or putty knife and is
suitable for use on impellers, chutes, hoppers, valves, rollers,
gaskets, cables, hoses etc.
Flexi Tech 80 FG
Flexi-Tech 80 F.G. is an 80 Durometer high performance
fluid elastomer which has been specifically developed for casting
and moulding of rubber components and is suitable for use on
impellers, chutes, hoppers valves, rollers, gaskets, cables, hoses
etc.
Flexi Tech 80 BG
Flexi-Tech 80 B.G. is a 80 Durometer high
performance brushing grade elastomeric which has been
specifically developed for brush repair of rubber components and
is suitable for use on impellers, chutes, hoppers valves, rollers,
gaskets, cables, hoses etc.
Grano Tech
Grano-Tech is a high performance mortar designed
for use as a heavy duty repair system for concrete and mineral
surfaces.
Grano Tech Primer
Grano-Tech Primer is a high performance, low
viscosity solvent free coating designed for use as a multipurpose
floor sealing and priming system for concrete surfaces.
Floor Tech PR
Floor-Tech P.R. is a high performance self-priming
epoxy repair mortar specifically designed for repairing damaged
and eroded concrete surfaces.
Floor Tech SP Primer
Floor-Tech S.P. Primer is a high performance, low viscosity
solvent free coating designed for use as a multipurpose
floor sealing and priming system.
Floor Tech RS
Floor-Tech R.S. is a high performance resurfacing
screed designed for use for concrete floors subject to abrasion
and chemical attack.
Floor Tech HB
Floor-Tech H.B. is a high performance solvent free
ceramic reinforced heavy duty coating designed for use for long
term floor protection.
Floor Tech FB Primer
Floor-Tech F.B. Primer is a high performance, low
viscosity primer designed for use as a multi-purpose floor sealing
and priming system for porous asphalt and concrete floors prior
to application of Thortex Flexible Flooring systems.
Floor Tech FB
Floor-Tech F.B. is a high performance solvent free
ceramic reinforced polyurethane system specifically developed
for use as a high build flexible floor coating.
Floor Tech WB
Floor-Tech W.B. is a high performance water-based
epoxy ceramic reinforced coating designed for use as a cost
effective durable floor protection system.
Floor Tech XF
Floor-Tech X.F. is a high performance solvent free system
specifically developed for use as a high build fast curing floor
coating.
Floor Tech LXF
Floor-Tech L.X.F. is a high performance solvent free system
specifically developed for use as a high build fast curing line
marking system.
Floor Tech FS Seal
Floor-Tech F.S. Seal is a high performance clear
polyurethane floor coating which provides the ideal sealer for
use in conjunction with Thortex Floor-Tech F.S. Flakes.
Grip Tech
Grip-Tech is a high performance solvent free epoxy
coating combined with an abrasion resistant aggregate designed
for use as a universal slip deterrent system for mineral and
metallic surfaces.
Wall Tech LW
Wall-Tech L.W. is a high performance epoxy mortar
designed as a lightweight repair compound for use on damaged
concrete and mineral surfaces in vertical and overhead areas.
Wall Tech CWC
Wall-Tech C.W.C. is a high performance polymer
modified cementitious compound designed to provide a barrier
against subsurface water on concrete surfaces.
Wall Tech UV
Wall-Tech U.V. is based on a complex blend of
water-borne acrylic and urethane polymers in combination with
colour stable chemical resistant pigments to provide a coating which
offers outstanding weather, chemical and abrasion resistance
together with excellent gloss, graffiti resistance and colour stability.
Wall Tech SC
Wall-Tech S.C. is a high performance water-based
coating designed to provide a hygienic coating for interal surfaces.
Seal Tech AW
Seal-Tech A.W. is a high performance all weather
coating designed for use for the emergency waterproofing of roof
areas with the capability of providing extended waterproofing.
Poly Tech
Poly-Tech is a high performance universal roof protection
system specifically developed for long term protection of all types of
roof surfaces.
Poly Tech BP Primer
Poly-Tech B.P. has been specifically developed as a
high performance sealer for porous and bituminous surfaces prior
to the application of Thortex Poly-Tech and Thortex
Therma-Tech R.G.
Uni Tech UV
Uni-Tech U.V is a high performance polymeric finish
system specifically developed for the long term cosmetic
protection of all types of structures such as concrete, brickwork,
plaster, GRP, steel, aluminium or galvanised steel.
Glaze Tech
Glaze-Tech is a high performance high build elastomeric
polyurethane coating designed for use as a clear system for glass
to prevent shattering.
Corro Tech GP
Corro-Tech G.P. is a high performance anti-corrosive
coating, designed for use as a long term protection system of new
and existing steel structures where surface preparation is
restricted.
Uni Tech XF
Uni-Tech X.F. is a high performance polymeric
coating system specifically developed for the long term cosmetic
finish for use on a wide variety of surfaces used within the
Construction and Petrochemical Industries, including concrete,
steel, aluminium etc.
Uni Tech GP Primer
Uni-Tech G.P Primer is a high performance multi
purpose water-based primer specifically developed to act as a tie
coat over existing coated surfaces and non porous substrates
including tiles, brickwork, plaster and powerfloated concrete.
Seal Tech SS
Seal-Tech S.S. is a high performance synthetic
elastomer compound designed for use as a caulking material for
expansion joints and other applications in food factories. The
product can also be used as a repair or lining material for rubber
and other surfaces.
|
