An oil company needed a half inch gap at the base of their tank chimes to be repaired and sealed. Unconventional Solutions used Viscotaq Sealant to seal the gap at the base of the tank. The Viscotaq Sealant was then covered with Viscotaq EZ Wrap for added protection.
This gas hold had extensive rusting. After grit blasting, 50-60 holes had appeared in the lower third section. The inside was coated with one coat of 3M Scotchkote Epoxy Primer MC 145, and two coats of the 3M Scotchkote Epoxy Ceramic Surfacer CR 511 reinforced system. On the outside, the holes were filled with 3M Scotchkote Epoxy Concrete Mortar LW 405, then the entire surface area was coated with one coat of 3M Scotchkote Epoxy Primer MC 145 and two coats of 3M Scotchkote Epoxy Ceramic Surfacer CR 511.